When the foundation is set on the roof or floor structure， the bearing capacity of its supporting structure should be checked.
Setting requirements: The main connection methods between the wall bracket and the building include: connecting the wall bracket with the embedded parts on the wall; Fix with wall bolts; Embedded bolts; Welding with steel structures.
DelftSafety devices: Electric elevators for construction should be equipped with overload detection devices. When the load inside the cage exceeds % of the rated load capacity， the overload detection device will give a warning signal inside the cage，
Setting requirements: The spacing of wall brackets along the vertical direction should comply with the provisions of the user manual.
KorolThe safety notice board for construction electric elevators should be prominently placed on the hanging cage for the rated load capacity and rated number of passengers of the construction electric elevator. It is strictly prohibited to use construction electric elevators beyond the rated load capacity or rated number of passengers.
When the door is closed except for the gap between the lower part of the door that should not exceed mm， any through-hole and opening size related to the distance between any door and adjacent moving parts， as well as the gap around the door or the gap between parts， should comply with the provisions of Table of GB -.
Model Example: Hanging Cage Specification: LABSC/TDx Type I: ~ Type II: ~ Type V: ~ Technical Requirements: The load-bearing capacity of the foundation should be greater than P: P=(hanging cage weight+outer cage weight+total weight of guide rail frame+counterweight+load) x. (kN).
Especially suitable for steel structured factories， suitable for both indoor and outdoor installation.
Construction electric elevators should be equipped with safety devices to prevent the cage from falling. The anti fall safety device should be functional at all times， disassembly， and before resetting after action. Fall arrest safety gear
Setting requirements: The installation and dismantling workers， electricians， and other operators of construction electric elevators should have special construction operations.
productionDrainage measures need to be considered around the foundation. (Drain the accumulated water on the foundation).
Work is essential， and the main protective accessories include safety belts， guardrails， protective covers， platforms and stairs， etc.
Chain type electric lifting mechanism: With a good guiding mechanism， smooth lifting and low noise.
Latest consultationFrom the perspective of the safety performance of the machinery itself，DelftFour wheel electric elevator， those that have undergone national safety certification will not have significant safety issues. The main problem is that after using the electric elevator for a period of time， mechanical components may fall off or be damaged due to various factors. This problem depends on regular inspection and maintenance of the machinery
Setting requirements: The up travel (limit) switch should be able to automatically stop the cage running at the rated speed before reaching the upper limit switch， but should not trigger the up travel (limit) switch as high
During loading and unloading， the horizontal distance between the edge of the cage door and the edge of the landing station should not exceed mm.
DelftThe pump body adopts an integrated pump station， all equipped with imported high-quality pump stations，Delft6 meter high electric elevator， which can also be selected according to customer requirements to meet customer ideal requirements.
Setting requirements: The anti loosening and anti loosening parts between the connecting parts should comply with the provisions of the user manual and should not be replaced by other objects. For connecting bolts with pre tightening requirements a torque wrench or special tool should be used to accurately tighten the bolts to the specified torque value according to the specified tightening sequence. When installing standard section connecting bolts， it is advisable to place the screw at the bottom and the nut at the top.
Setting requirements: The main connection methods between the wall bracket and the building include: connecting the wall bracket with the embedded parts on the wall; Fix with wall bolts; Embedded bolts; Welding with steel structures.
